Beats Solo 3 Not Turning On: [FIXED]

If you’re facing the frustrating issue of your Beats Solo 3 headphones refusing to power on, you’re not alone.

A common problem with these popular headphones is a failure to turn on, often attributed to a dead battery or a malfunctioning power button.

In this comprehensive guide, we will explore seven effective fixes to breathe life back into your Beats Solo 3.

Table of Contents

First and Foremost:

Before diving into the fixes for Beats Solo 3 not turning on, let’s address three crucial points to respect our readers’ time:

Consider a Refund for New Purchases:

If you’ve recently bought your Beats Solo 3 and are already experiencing power issues, it might be wise to seek a refund.

Save your money and time by exploring alternative headphones in the same price range, such as “Sony WH-XB910N” and “JLab Epic Air Sport ANC” which offer better performance.

Know the Lifespan:

Typically, the Beats Solo 3 has a lifespan of around 17 months or 1.5 years. If you’ve used your headphones for this duration, you’ve already received good value for your money.

Attempting to fix them may provide a short-term solution, but, likely, they won’t last much longer.

If you’re relying on them for uninterrupted music enjoyment, it’s advisable to consider a replacement instead of relying on fixes.

For Headphones Under 1.5 Years:

If you’ve had your Beats Solo 3 for less than 1.5 years, then you can explore the practical fixes mentioned below to try and resolve the not-turning-on issue.

These solutions are relevant for relatively newer headphones and may help extend their lifespan.

Now, let’s proceed with the practical fixes for those within the 1.5-year timeframe.

How To Fix Beats Solo 3 not turning on

Charge the Headphones

The first and most obvious step is to ensure that your headphones have an adequate battery charge.

Plug them into a power source using the provided USB cable and let them charge for at least 3-4 hours.

Sometimes, a simple lack of power is the root cause of the issue, and this quick fix might be all you need to get your Beats Solo 3 back in action.

Check for Water Damage

Water damage can wreak havoc on electronic devices, and your Beats Solo 3 is no exception.

If you suspect water damage, inspect the headphones thoroughly. Look for any signs of moisture in the charging port or on the surface.

If you find any, dry the headphones entirely before attempting to turn them on again.

Also Read: Skullcandy Hesh ANC Not Pairing

Factory Reset the Headphones

A factory reset can often resolve software glitches that may be preventing your Beats Solo 3 from turning on.

To perform a factory reset, you can follow these steps:

Turn off your Beats Solo 3 headphones.
Press and hold the power button and the volume down button simultaneously for about 10 seconds.
Release both buttons when the LED indicator on the headphones flashes white and then red.
Your Beats Solo 3 headphones are now reset to factory settings.

This action will reset the headphones to their default settings. After the reset, try turning them on again to see if the issue persists.

Check for Software Updates

Outdated firmware can sometimes lead to functionality issues. Installing the latest firmware can address bugs and enhance the overall performance of your headphones.

To update the firmware on your Beats Solo 3 headphones, you’ll need to follow these steps:

Ensure that your Beats Solo 3 headphones are fully charged or have sufficient battery life.
Connect your headphones to your computer or mobile device using the provided USB cable.
Go to the Beats Updater website using a web browser on your computer or mobile device.
Follow the instructions on the website to download and install the Beats Updater software.
Once the software is installed, launch it and follow the on-screen instructions to check for firmware updates for your Beats Solo 3 headphones.
If an update is available, follow the prompts to download and install the firmware update.
Once the update is complete, disconnect your headphones from your computer or mobile device and use them as usual.

Check the Battery Charge Level

Press the power button and observe if any LED lights come on. These lights indicate the battery charge level.

If no lights appear, the battery might be completely drained or faulty. In such cases, it may be necessary to replace the battery.

However, before taking that step, proceed to the next fix.

Replace or Charge the Battery Overnight

If charging the headphones for 3-4 hours doesn’t yield results, consider replacing the battery.

Alternatively, charge the existing battery overnight for at least 8 hours. This extended charging time may help revive a deeply depleted battery.

After the charging period, attempt to turn on the headphones and check if the issue persists.

Check for Hardware Issues

If none of the above fixes work, it’s time to consider the possibility of hardware issues. Inspect the headphones for any visible damage, especially on the circuit board.

If you notice any physical damage or suspect an internal hardware problem, it’s recommended that you contact Beats for professional repair services.

Attempting to fix complex hardware issues without the necessary expertise may further damage your headphones.

Conclusion

Experiencing issues with your Beats Solo 3 not turning on can be frustrating, but the solutions outlined in this guide cover a range of possibilities.

From basic troubleshooting steps like charging and water damage checks to more advanced measures like factory resets and firmware updates, these fixes are designed to help you identify and resolve the root cause of the problem.

Remember, each step serves a unique purpose, and it’s essential to follow them in sequence.

If, after exhausting all the fixes, your Beats Solo 3 still refuses to turn on, reaching out to the manufacturer’s support or seeking professional repair services is the next logical step.

With patience and careful attention to detail, you can increase the likelihood of successfully bringing your Beats Solo 3 headphones back to life.