Sesh Evo earbuds are a popular choice for music lovers, providing a seamless and immersive audio experience.
However, some users may encounter a common issue – fast battery drainage. In this article, we will delve into the various reasons behind this problem and explore practical fixes to extend the battery life of your Sesh Evo earbuds.
Common Causes of Battery Drain
Constant Bluetooth Connection:
One primary reason for rapid battery drainage is the constant Bluetooth connection. The earbuds use more power to maintain a connection, putting a strain on the battery.
Outdated Firmware:
If either the earbuds or the connected device has outdated firmware, it can lead to battery drainage issues.
Regular updates often include bug fixes and performance improvements that address such issues.
Improper Storage:
Improper storage, like leaving the earbuds exposed to direct sunlight or in an open space, can cause the battery to overheat.
This, in turn, reduces the battery’s lifespan and contributes to faster drainage.
Faulty Battery:
A faulty battery is another potential culprit behind fast battery drainage.
In such cases, the battery may not hold a charge as effectively, leading to a quicker depletion of power.
How to Fix Sesh Evo Battery Draining Fast?
1. Update Firmware:
Keeping your Sesh Evo earbuds up to date is a fundamental step in optimizing performance.
Firmware updates often include not only bug fixes but also enhancements that directly address potential battery drain issues.
To update the firmware of your Sesh Evo earbuds, you can use the Skullcandy App. Here’s how you can do it:
- Download and Install the App: Visit the Google Play Store (for Android) or the App Store (for iOS) and search for the Skullcandy app. Download and install the app on your smartphone.
- Pair Your Sesh Evo: When pairing your Sesh Evo to your phone, be sure to select only “Sesh Evo” and not “Sesh Evo-LE”.
- Check for Updates: Once the app is installed, open it and check if there is a firmware update available for your Sesh Evo earbuds. You can do this by tapping on the firmware version in the app.
- Initiate the Update: If an update is available, follow the on-screen instructions to initiate the update. Ensure that your earbuds are in the case and that the case is charged. Also, make sure to keep your phone unlocked during the update for the best results.
2. Turn Off Auto-Off:
The auto-off feature, designed to conserve battery when the earbuds are not in use, can sometimes malfunction and contribute to drainage even during periods of inactivity.
Disabling this feature temporarily can help you determine if it’s the culprit behind your battery issues.
Here is how you can disable this feature:
- Open the Skullcandy App and find your Sesh Evo earbuds.
- Tap on their settings and look for “Auto Off” or “Sleep Mode.”
- Choose the longest timeout duration available.
- Save your changes.
Also Read: Marshall Motif anc Not Charging
3. Reduce Volume:
While it may seem simple, adjusting the volume can have a significant impact on battery life. High volume levels consume more power, so lowering the volume is an effective way to conserve battery.
4. Disable Transparency Mode:
If you rarely use transparency mode, consider turning it off. This feature utilizes additional processing power, contributing to faster battery drainage.
Disabling it when unnecessary can extend your earbuds’ battery life.
To disable Transparency Mode in Skullcandy Sesh Evo earbuds, you can follow these steps:
- Make sure both earbuds are powered on.
- Press and hold either earbud for 3 seconds to turn off Transparency Mode
5. Close Unused Apps:
Background apps can be a silent drain on your battery. Before storing your Sesh Evo earbuds, make sure to close any unnecessary music or podcast apps running in the background.
This can prevent them from consuming precious battery power.
6. Clean Charging Contacts:
The charging contacts on both the earbuds and inside the charging case can accumulate dirt or corrosion over time.
Regularly clean these contacts with a dry cotton swab to ensure proper charging, preventing unnecessary battery drain.
To clean the charging contacts of Skullcandy Sesh Evo earbuds, you can follow these steps:
- Clean the charging case with a soft fabric to remove dirt, dust, and debris.
- Use a blower to clear dust or a toothpick to dislodge stubborn debris from the charging port.
- Take a cautious approach when cleaning the charging port since it has delicate pins. Any broken connectors can cause irreversible damage, forcing you to replace the charging port.
- If the charging contacts are not making proper contact with the earbuds, try waiting momentarily as the buds connect, occasionally it takes a few seconds to begin charging.
It’s important to note that you should not use water to clean the charging contacts, as water and electricity are incompatible companions
7. Reset the Earbuds:
Software glitches can sometimes be the cause of battery drain. Refer to your Sesh Evo manual or follow below given steps to reset the earbuds.
This can potentially resolve issues caused by software malfunctions.
To reset Skullcandy Sesh Evo earbuds, follow these steps:
- Make sure both earbuds are powered off.
- Touch and hold each earbud for 10 seconds to completely reset them. This will power cycle them on and off again.
- Once both buds have gone through the power cycle, place them back in the case until both LEDs show red, and then pull them back out. Both buds will automatically power on and the LEDs will simultaneously flash blue while they sync.
It’s important to note that you should ensure the earbuds are not currently paired with any nearby device before resetting them.
8. Check for Bluetooth Interference:
Bluetooth interference from other devices in the surrounding area can impact the stability of the connection, leading to additional battery drain.
Experiment with different locations or try turning off other Bluetooth devices to minimize interference.
9. Replace the Earbud Tips:
Over time, earbud tips can wear out or become damaged, affecting the seal in your ears.
A poor seal can force the earbuds to work harder, resulting in faster battery drainage. Regularly inspect and replace earbud tips to maintain optimal performance.
10. Contact Sesh Support:
If all else fails and your Sesh Evo earbuds continue to experience rapid battery drainage, it’s time to reach out to Sesh support.
Their expertise can help diagnose and provide a tailored solution to your specific issue, ensuring you get the most out of your earbuds.
Additional Tips for Battery Maintenance
Use the Charging Case:
Beyond providing a secure storage space, the charging case is designed to keep your Sesh Evo earbuds charged and ready for use.
Cultivate the habit of storing them in the case when not in use to prevent accidental battery drain.
Avoid Extreme Temperatures:
Both hot and cold temperatures can adversely affect battery life.
Be mindful of where you store your earbuds, ensuring they are protected from extreme conditions to maintain optimal performance.
Store in Charging Case for Extended Periods:
If you anticipate not using your earbuds for an extended period, store them in the charging case with the case turned off.
This practice helps preserve battery life over time, ensuring your earbuds are ready to go when you need them.
Other Common Issues With Sesh Evo Earbuds
In addition to rapid battery drainage, Sesh Evo may experience several other common issues, such as:
1. Buds Not Charging in Case/Case Lid Not Closing Properly:
This can be due to a variety of reasons, such as the buds not connecting immediately, dust or debris in the charging port, or using an incompatible charging cable.
Waiting for a few seconds for the buds to connect, cleaning the charging case and buds, and using the provided charging accessories can help resolve these issues.
2. Pairing and Syncing Difficulties:
Users have reported issues with the buds not syncing with each other, only one bud connecting to a device, or the buds not pairing correctly.
Resetting the earbuds and ensuring they are not currently paired with any nearby device can help resolve these issues.
3. Earbud Not Charging or Turning On:
If an earbud is not charging or turning on, it’s recommended to ensure that the charging pins are clean and not obstructed.
If the issue persists, resetting the earbud by placing it back in the charging case and holding the button on the back of the earbud may help.
If the problem continues, contacting Skullcandy support for further assistance is advised.
4. Sound Quality Problems:
Some users have also experienced issues with sound quality. In such cases, it’s important to ensure that the earbuds are clean and free of any obstructions.
If the issue persists, contacting Skullcandy support for further assistance is recommended.
Conclusion
In conclusion, addressing Sesh Evo battery drain issues involves a combination of understanding common causes and applying practical fixes.
By following these simple tips and tricks, you can maximize the battery life of your Sesh Evo earbuds, ensuring a longer and more enjoyable listening experience.
If problems persist, don’t hesitate to seek assistance from Sesh support for a tailored solution to your specific issue.
